|
|
 |
Flow Switches
 |
| • |
Accurate switching flow monitor
for water or oil - based solutions
up to 100 bar (1,500 PSI) |
| • |
High accuracy even under low
flow conditions |
| • |
Separate adjustments for Range
and Set-Point |
| |
 |
|
|
|
 |
flow-captor smart meter
Type 4115.30 |
| The flow-captor smart meter
is the answer to the problems
with insertion type flow
meters.
Flow rate through a pipe
diameter will vary depending
upon the nature of the flow
profile (laminar or turbulent)
and the insertion depth of the
flow sensor. |
| |
|
|
|
|
 |
| flow-captor smart meter Type 4115.30 sm |
| • |
Suitable for pipes up to 24” |
| • |
Measuring range from
0.2 m/s up to 3.5 m/s |
| • |
A flow meter for
everything that flows |
| • |
Made for the 1/7th law |
| |
|
|
|
|
 |
flow-captor
Type 4114.30, 4115.30 |
| Self-contained flow meter
for all measurement and
control applications, wide
measurement range, nonintrusive
sensing, linear
current output,
for liquids and semi-solids,
no moving parts, stainless
steel sensing surface. |
| |
|
|
|
|
 |
vent-captor
Type 3201.--, 3204.-- |
| vent-captor air flow monitors are solid state switch and
monitoring devices for use in industrial air handling
applications.
vent-captor air flow monitors are self-contained switching
devices without any mechanical moving parts, which
convert flow conditions into electrical switching signals. |
| |
|
|
|
|
|
vent-captor
Type 3202.-- & 3205.-- |
| The vent-captor type 3202.- is a solid-state flow-monitor for air or
gaseous media in a wide variety of industrial applications.
Being totally encapsulated in epoxy resin with no moving parts, this
small, compact unit operates with high precision and high
repeatability in harsh industrial environments. |
| |
|
|
|
|
 |
| The revolutionary micro flow is taking the weber pioneered
“calorimetric principle” to the next generation. It can measure flow of any liquid
medium… Water, Oil, Grease,
Silicone, aggressive chemical
medium |
| |
|
|
|
|
 |
| captor Flow Sensing Toolbox |
| This tool can help you when it comes to calculations of flow parameters in pipes and ducts and can give advise on ideal mounting and installation position for your flow sensor. |
| |
 |
|
|
|
|
|
 |
|
 |
 |
Gordy’s Sensors • 5772 Smaller Rd, Johnstown, OH 43031
Phone: (740) 967-2283 • Fax: (740) 967-2855
www.gordyssensors.com or sales@gordyssensors.com
|
|
